Tip: Be sure to plug in the power after the water is installed.Style: single handle single holeWhether the faucet rotates: can be rotatedProduct Category: Electric faucetNumber of heat collecting tubes: 55Control method: CNCType: Fully automaticLiner material: stainless steelHot water yield: 460Capacity: 50-80LShell material: plasticWinter temperature: 55Water heater type: electric faucetEnergy efficiency rating: Level 4 Logistics servicesSize: 20*20*20Heating power: 3000Packing size: 20*20*20Inlet mode: lower water, side near waterNet weight: 1.5 kgPurchase Notes1. The faucet is strictly prohibited to be installed upside-down, and must be installed vertically. When the faucet is used for the first time, it must be turned on the cold water and then powered on. When faucet is installed, please read the installation instruction.2. The product water from 0.04 Mpa to 0.6 Mpa, (actual test water yield in 25 seconds with a bottle of bottle of 50 oml, for reference only) for the product is to rely on the water pressure to start heating device, so the first time to use the light not bright out basic can be concluded that hot water is the water pressure is not enough, if your home is not water, is to rely on water tower water Wells to water, and water pressure small, we do not recommend you to buy.3 suggest user after each use hot water to make sure you put for a while after cold water to close the switch, so that you can avoid machine for a long time due to machine switch is not fully closed water seepage caused by low water pressure forced start, internal flow forming cycle of the machine is heated high temperature overheat protector Rao bad products and such operation also can prolong the service life of heating tube.